Part No. Tubing O.D.  in  (mm) CL in  (mm) Wt - lbs G2008EG 1/4  (6.3) 9/16  (14.3) 0.040 G2010EG 3/8  (9.5) 5/8  (15.9) 0.052 G2012EG 1/2  (12.7) 11/16  (17.5) 0.058 G2014EG 5/8  (15.8) 3/4  (19.0) 0.071 G2016EG 3/4 (19.0) 13/16  (20.6) 0.077 G2018EG 7/8  (22.2) 7/8  (22.2) 0.087 G2020EG 1  (25.4) 15.16  (23.8) 0.100

Part No. Used With Wt - lbs G2949EG G1000 Series of Channels 0.46 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.  Holes are 9/16″ (14.3) diameter 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified.  

Part No. Wt - lbs G1186EG 0.56 "A" is available in any angle up to 90°.  Dimensions shown may vary based on specified angle “A” Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.  Holes are 9/16″ (14.3) diameter 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified.

Part No. Wt - lbs G1281EG 0.45 Material is 1-5/8" (41.3) wide x 1/4" (6.3) thick unless specified.  Holes are 9/16" (14.3) diameter 13/16" (20.6) center to edge on 1-7/8" (47.6) centers unless specified.

Part No. Wt - lbs G1065EG 0.34 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.  Holes are 9/16″ (14.3) diameter 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified.

Part No. Wt - lbs Bolt Size in  (mm) Hole Size in  (mm) G2862EG 0.17 1/4  (6.0) 5/16  (7.9) G2863EG 0.17 3/8  (10.0) 7/16  (11.1) G2864EG 0.16 1/2  (12.0) 9/16  (14.3)  

Part No. Wt - lbs Bolt Size in  (mm) Hole Size in  (mm) G1062EG 0.17 5/16  (7.0) 3/8  (9.5) G1063EG 0.17 3/8  (8.0) 7/16  (11.1) G1064EG 0.15 1/2  (12.0) 9/16  (14.3) G1964EG 0.15 5/8  (16.0) 11/16  (17.5) G2471EG 0.14 3/4  (20.0) 13/16  (20.6) G2490EG 0.13 7/8  (22.0) 15/16  (23.8)  

Part No. Maximum Moment Max Load Wt - lbs G1593EG 12,5000 (1412 Nm) When mounted on 12 gauge channel Applies to bracket only, not the strength of the strut arm 2.46 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.  Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.