Wing Fitting Single Corner 3 Hole Left
admin2026-01-26T15:46:04+00:00Part No. Wt - lbs G2341LEG 0.53 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.
U-Fitting Cross 8 Hole 1-5/8″
admin2026-01-26T15:46:38+00:00Part No. Wt - lbs G2326EG 1.67 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.
U-Fitting Cross 3 Hole 4-7/8″
admin2026-01-26T15:47:21+00:00Part No. Wt - lbs G2473EG 1.59 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.
3-1/4″ U Fitting
admin2026-01-26T15:47:52+00:00Part No. Wt - lbs G1737EG 1.18 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.
3 Hole U-Fitting 2-7/16″
admin2026-01-26T15:48:54+00:00Part No. Wt - lbs G5547EG 1.03 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 13/16″ [20.6] from edge on 1-7/8″ [47.6] centers unless specified.
Double Axel Trolley
admin2026-01-16T21:53:25+00:00Part No. Max Load Rating (kN) Wt - lbs G2950EG 600 lbs (2.67 kN) with 12 gauge channel 1.19
2 Hole Open 45 Degree Corner Angle
admin2026-01-26T15:52:21+00:00Part No. Wt - lbs G1546EG 0.58 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 9/16″ (14.3) diameter 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified
2 Hole 3-1/2″ Corner Angle
admin2026-01-26T15:58:53+00:00Part No. Wt - lbs G1282EG 0.51 Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified. Holes are 9/16″ (14.3) diameter 13/16″ [20.6] center to edge on 1-7/8″ [47.6] centers unless specified
Bracket 6 Hole Support for Strut Channel
admin2026-01-26T16:10:04+00:00Part No. Wt - lbs Length in (mm) A in (mm) Uniform Load lbs (kN) G1773EG 2.58 12 1/2 (317.5) 3 3/4 (95.2) 900 (4) G1775EG 2.92 14 1/2 (368.3) 5 3/4 (146.0) 900 (4) Load shown for bracket mounted on 12 gauge channel Material is 1-5/8″ [41.3] wide x 1/4″ [6.3] thick unless specified.
Heavy Duty Beam Clamp
admin2026-01-16T22:49:42+00:00Part No. Wt. - lbs Rod Size Set Screw Thickness Design Load lbs (kN) G2401SEG 1.51 3/8" 1/2" - 13 x 2" 3/16" 800 (3.56) G2403SEG 1.93 1/2" 1/2" - 13 x 2" 1/4" 1,300 (5.78)
