Hole Diameter: 9⁄16” (14.3); Hole Spacing-From End: 13⁄16” (20.6); Hole Spacing-On Center: 17⁄8” (47.6); Width: 15⁄8” (41.3); Thickness: 1⁄4” (6.4)
Material
Carbon steel (Type 304 or 316 Stainless Steel upon request)
Electro-galvanized (hot-dip galvanized, e-coat, and powder coated upon request)
Specify figure number, material, and finish
| Part No. | Length | Uniform Load lbs |
Uniform Load kN |
Wt. Each lbs |
Wt. Each kg |
| G2513A | 6 (152.4) | 1600 | (7.12) | 1.90 | (0.86) |
| G2514A | 12 (304.8) | 800 | (3.56) | 2.75 | (1.25) |
Unless otherwise specified, all dimensions on drawings or in charts are in inches and dimensions shown in parentheses are in millimeters
Local: 587-853-6655
Toll Free: 866-671-3571
Fax: 780-465-0415
Email: sales@cts-industries.odoo.com
4530 – 101 Street
Edmonton, Alberta
Canada, T6E 5G9
Local: 587-871-4346
Toll Free: 866-557-6273
Fax: 403-243-2882
Email: sales@cts-industries.odoo.com
3616 Manchester Road
Calgary, Alberta
Canada, T2G 3Z5
AFFILIATIONS
©COPYRIGHT 2025 | All Rights Reserved | PRIVACY POLICY | TERMS & CONDITIONS | CTS INDUSTRIES
